Skip to content

AI uses for records

Procurement approval delegation: can an agent find a valid delegate?

By SourceX Editorial · Updated

10 sections

Short answer

An agent should accept a delegate only when the absent approver's delegation rule was enabled and in its window at decision time, covered this document type, the delegate's own signing authority reaches the document's level, and the delegate has no conflicting role in the transaction. Routing settings move work items; they do not grant authority. If any test cannot be proven from records, escalate.

Provenance trail

Procurement approval

This page covers procurement approval delegation: can an agent find a valid delegate.Illustrative

Key takeaways

  • A delegation rule moves work items; signing authority comes from a separate, written limits table or delegation of authority.
  • Seven ordered tests decide validity: unavailability, active rule, scope, authority band, independence, chain depth and evidence trail.
  • The deputy named in the rule can fail on authority band or because they prepared the requisition.
  • Each dated task freezes the decision instant, the rule rows and the limits table version in force, and keeps the expected decision separate from the recorded status.
  • A good task set fails each test once and includes clean passes, so refusing every delegation cannot score well.

How should an agent identify a valid delegate when an approver is unavailable?

An agent should treat a delegate as valid only when four things hold at the moment of the decision: a delegation rule from the absent approver was enabled and in its date window, the rule's scope covers this document type, the delegate's own authority reaches this document's level, and the delegate has no conflicting role on the same transaction. If any test fails or cannot be proven from records, the agent escalates instead of routing.

Most systems make the first two tests easy and leave the last two to policy. In Microsoft Dynamics 365 Finance and Supply Chain Management, for example, an approver can set an automatic delegation rule with a scope, a delegate, a start and end date and time, and an Enabled check box. That rule moves work items. It does not, by itself, answer whether the person receiving them may sign for the amount or category in front of them.

This page turns that gap into something testable: a delegation rule an agent can apply, and a dated set of authority tasks, each with a starting state, linked evidence, the applicable rule, an expected decision and an outcome check. Every example is illustrative.

Routing a work item and holding signing authority are different facts

A workflow engine records who a task is assigned to. A delegation of authority records who may commit the organization, for what, up to which level and until when. Agents that conflate the two will happily approve whatever lands in a delegate's queue.

The Dynamics 365 documentation is explicit about the routing side. When an approver delegates a document, it is assigned to another user for approval, and that user acts on behalf of the original approver, so the workflow continues as if the original approver had acted. Purchase requisition workflows in the same product include a signature authority review step, where a group manager reviews lines whose cost exceeds the department manager's signing limit. Those are two separate mechanisms, and a delegate who inherits the queue does not inherit the higher review step's role.

Public procurement states the authority side in plain terms. Under FAR 1.602-1, contracting officers may bind the Government only to the extent of the authority delegated to them, and the limits of that authority come in writing. Private companies may write it less formally, but the same idea applies: a delegation that exists in a policy document, a board resolution or a limits table, not only in a routing setting.

The delegation validity rule, test by test

Apply the tests in order and stop at the first failure. The order matters because an early failure (no active rule) makes the later questions moot, and because the record that proves each test lives in a different place.

The delegation validity rule, test by test
TestQuestion the agent asksRecord that proves itFails when
T1 UnavailabilityIs the named approver actually unavailable for this item?Delegation rule window, out-of-office entry or leave record dated before the decisionThe approver is available, or unavailability is inferred only from silence
T2 Active ruleWas a delegation rule enabled and inside its start and end time when the item arrived?Rule row with created date, start, end, enabled flag and commentRule disabled, expired, starts later or was created after the decision
T3 ScopeDoes the rule cover this document type, module or workflow?Rule scope value (all, module or a named workflow)Scope names a different workflow or module
T4 Authority levelDoes the delegate's own limit reach this document's amount band and category?Signing limit table or written delegation of authority, version in force on the dateDelegate's band is lower, or the category needs a role the delegate lacks
T5 IndependenceIs the delegate free of a conflicting role on this transaction?Requisition preparer, requester, vendor master change and receipt recordsDelegate prepared, requested, set up the vendor or will receive the goods
T6 Chain depthIs the delegate the first holder, or was the item passed on again?Workflow history with each delegation action, user and timestampItem was re-delegated beyond what policy allows, or the chain loops
T7 Evidence trailWill the decision be reconstructable later?Delegation comment, approval action and the policy version citedAny of the above can only be asserted, not linked to a record

Which constraint makes the obvious delegate the wrong one?

The obvious candidate is the approver's assistant or deputy, because that is whom the rule names. A common disqualifier for that person is T4: a deputy may sit one authority band below the person they cover, so a rule that is perfectly valid for routine requisitions becomes invalid for the one large order that arrives during the absence.

T5 is the second trap and the more damaging one. In smaller teams, the deputy can be the same buyer who raised the requisition or onboarded the supplier. The 2014 edition of GAO's internal control standards, the Green Book, said management evaluates each delegation for proper segregation of duties, separating authority, custody and accounting, and delegates authority only to the extent required to achieve objectives. Its 2025 revision, effective from fiscal year 2026, still treats delegation of authority under the organizational structure principle and keeps segregation of duties as a control activity. An agent that routes a requisition to its own preparer has created exactly the combination those standards warn about, even if every system setting was correct.

The fastest choice fails in a third way. Sending the item to whoever is free in a shared queue satisfies the clock, but a queue member who completes a review task is not thereby an approver. Dynamics 365 notes that only one person can complete a queued task; it says nothing that turns that person into the signing authority.

What each dated authority task records

A task is one approval decision frozen at a moment in time, with everything the agent needed to decide and everything a reviewer needs to check. The schema below is the minimum; fields marked as dated must carry a timestamp with an offset so that window tests can be replayed.

Keep the expected decision separate from what happened in production. Real histories include approvals that should have been escalated; those are valuable precisely because the recorded status and the correct decision differ.

What each dated authority task records
FieldTypeExample value (illustrative)Why it is there
task_id and as_ofstring, datedDLG-014, decision time 09:40 local with offsetPins every window test to one instant
documenttype, id, amount band, categoryPurchase requisition line, band 3 of 4, capital equipmentDrives scope and authority tests without exposing amounts
named_approveruser id, band, status sourceDepartment manager, band 2, leave recordStarting state for T1 and T4
delegation_ruleslist of rule rowsScope purchase requisitions, delegate deputy, window 5 working days, enabledEvidence for T2 and T3, including rules that should not apply
authority_table_versionversion id, effective dateLimits table v7 effective at start of quarterLets T4 use the limits in force, not today's
transaction_rolesmap of role to userPreparer, requester, vendor creator, receiverEvidence for T5
historyordered actions with user and timeSubmitted, delegated, delegated again, approvedEvidence for T6 and the outcome check
expected_decision and outcome_checkenum plus linked recordEscalate to group manager; group manager approval present in historySeparates the right answer from the status field

A worked case: the band-two deputy and the band-three order (illustrative)

Starting state: a department manager is on leave for five working days and has an enabled rule that delegates all purchase requisition work items to a deputy for exactly that window. On day two, a requisition line in amount band three arrives. The deputy's limit in the version of the limits table in force that day is band two. The deputy did not prepare the requisition.

Linked evidence: the leave record and the rule row (T1, T2), the rule scope covering purchase requisitions (T3), the limits table version and the deputy's band (T4), the preparer and requester fields (T5), and a history showing one delegation (T6).

Decision: T1 through T3 pass, T4 fails. The correct action is to route the line to the next authority level that holds band three, which in this illustrative configuration is the group manager's signature authority review, and to record that the delegate was skipped because of band. Approving through the deputy would produce an Approved status and a plausible message, and it would still be wrong.

Outcome check: the task passes only if the history shows an approval by a user whose band reaches three on that date, and the agent's note cites the limits table version. A later Approved status by the deputy alone is scored as a failure, whatever the eventual delivery outcome was.

Counterexample in the same set: the identical case one week later, after the leave ended. T1 fails, because the approver is back, and the agent should send the item to the named approver rather than apply a rule whose window has closed. A set that contains both cases teaches window logic and authority logic separately.

The task set: ten cases that cover each failure once

Build the set so that each test fails on its own in at least one case, plus cases where everything passes, so that refusing every delegation cannot score well. The ten below are an illustrative starting grid; teams can expand each row with variants drawn from their own history.

At a glance

The task set: ten cases that cover each failure once

  • DLG-01 Clean pass: active rule, matching scope, delegate band equal to document band, no conflicts. Expected: route to delegate and approve.
  • DLG-02 Silence is not absence: no leave record or rule, approver simply slow for two days. Expected: remind or escalate on age, do not pick a delegate.
  • DLG-03 Expired window: rule ended the evening before the item arrived. Expected: route to named approver.
  • DLG-04 Rule created after submission and backdated: rule created date later than the decision, start date earlier. Expected: treat as not in force at decision time and flag.
  • DLG-05 Wrong scope: rule limited to vendor invoice workflow, item is a purchase agreement. Expected: no delegate, escalate.
  • DLG-06 Band too low: the worked case above. Expected: route to the next level holding the band.
  • DLG-07 Delegate is preparer: deputy raised the requisition. Expected: skip delegate, route to an independent approver.
  • DLG-08 Chain of two: delegate is also away and re-delegated. Expected: accept only if policy allows a second hop and the second delegate passes T4 and T5.
  • DLG-09 Approver returns mid-item: rule window ends while the item is pending. Expected: decision belongs to whoever holds it at action time, recorded with the time.
  • DLG-10 Limits table changed during the absence: new version lowers the delegate's band. Expected: apply the version in force at decision time, not at submission.

The record that proves who signed, and whether the order went through

Status fields prove very little. An Approved flag tells you the workflow ended; it does not tell you who held authority. The proving record for a delegation decision is the workflow history entry that names the delegating user, the receiving user, the time and the comment, joined to the authority table version in force at that time.

Dynamics 365 workflow history records approvals, delegations, rejections and change requests with the date of each action and the user who performed it, together with comments. That history is the spine of each task. The authority table and the transaction role fields are joined to it by user id and date.

For the outcome, link forward from the approval to the purchase order and the receipt. A delegation decision is judged correct on authority, not on whether the goods arrived, but the forward links let a reviewer confirm that the approved document is the one that was executed and that no second, unapproved version slipped through.

Where a delegation task set stops being trustworthy

Three conditions break the method. If delegation lives only in email or chat, with no rule row and no history action, T2 and T6 cannot be proven and the case should be marked unprovable rather than guessed. If the authority table has no version history, T4 can only be checked against today's limits, which silently rewrites the past. And if user ids were merged or recycled after a reorganization, T5 can produce false conflicts or miss real ones.

Be careful with policy differences too. Some organizations forbid delegation for certain categories entirely, and some allow it only to named roles. Those rules belong in the task as an explicit policy reference; an agent should not infer them from what usually happened. Real histories used to build cases may also contain personal data about absences, which should be reduced to the dated fact of unavailability before anything leaves the company.

Approval histories as licensable training material

Procurement teams with several years of requisition, delegation and approval history hold exactly the linked records this task set needs, including the uncomfortable cases where a status said Approved and the authority test says otherwise. Those are the rows agent builders find hardest to synthesize.

Through SourceX, a procurement team can license chosen approval histories as an AI dataset, with SourceX running rights review, contracting, preparation and delivery. Nothing moves until the company approves the scope and signs, and qualification is checked at the outset in a short assessment requiring no uploads.

Frequently asked questions

Does an automatic delegation rule give the delegate the approver's signing limit?

Not by itself. A delegation rule reassigns work items for a period and scope; whether the delegate may approve a given amount or category depends on the organization's written delegation of authority or limits table. Check both, and treat the stricter one as binding.

What should an agent do if no valid delegate exists?

Escalate to the next authority level that covers the document, or hold the item and notify the requester with the reason. It should never pick the nearest available person from a queue, because completing a queued task is not the same as holding approval authority.

Can a delegate re-delegate an item to someone else?

Some systems allow it, and policies vary. Treat each hop as a new delegation that must pass the scope, authority and independence tests on its own, and cap the chain at whatever depth policy allows.

Why does the decision time matter more than the submission time?

Rules start and expire, approvers return and limits tables change. The authority that counts is the one in force when the approval action was taken, so each task records an as-of timestamp and the versions of every rule and table at that instant.

Is an email saying I am out, please ask my deputy a valid delegation?

It is evidence of unavailability and of intent, but it usually does not establish authority or scope. Record it, link it to the item, and still apply the authority and independence tests before routing.

Sources

  • Dynamics 365 automatic delegation rules specify a scope (all, module or workflow), a delegate, start and end date and time, an Enabled check box and a comment. Source
  • In Dynamics 365 workflows, a delegated document is assigned to another user who acts on behalf of the original approver, and only one person can complete a queued task. Source
  • Dynamics 365 purchase requisition workflows can require a group manager's signature authority review when a line exceeds the department manager's signing limit. Source
  • Dynamics 365 workflow history shows approvals, delegations, rejections and change requests with the date of each action, the user and comments. Source
  • FAR 1.602-1 says contracting officers may bind the Government only to the extent of the authority delegated to them, with limits set out in writing. Source
  • GAO's Standards for Internal Control say management evaluates delegations for segregation of duties and delegates authority only to the extent required. Source
  • GAO's 2025 Green Book revision supersedes the 2014 edition, applies from fiscal year 2026, and keeps a principle on organizational structure and delegation of authority and a section on segregation of duties. Source

See if your company qualifies

A short company assessment. No data uploads are needed.

See if your company qualifies