AI uses for records
Engineering requirement conflict dataset: 104 Kubernetes trade-offs, 5 measured
By SourceX Editorial · Updated
10 sections
Short answer
An engineering requirement conflict dataset should record each requirement's owner and measurable target, who raised the clash, which side gave way and by how much, who approved it, and whether the accepted cost was later measured. Kubernetes shows the usual gap: of 386 design proposals that answer its latency question, 104 admit a cost to operations its SLOs cover, 5 report a measurement and 19 only promise one.
Agent run
Engineering requirement
Key takeaways
- A requirement conflict record is only labelable when the competing requirement has a numeric target and the settlement has a verification result or pointer.
- In Kubernetes, 104 of 386 KEPs that answer the SLO latency question admit a cost; 80 of those rest on reasoning alone.
- Thirty-seven of the 104 settle the conflict by confining the cost to clusters or workloads that opt in, the most common compromise in the record.
- Four KEPs already at stable still promise to measure the latency cost later, so the proof of the compromise lives outside the decision record.
- Merged design documents overrepresent conflicts the feature survived; buyers should also request rejected proposals, review objections and post-rollout measurements.
What is an engineering requirement conflict, and what must its record show?
An engineering requirement conflict is a case where two requirements, each with an owner and a test, cannot both be met in full by any design on the table, so one of them gives way. A usable record names both requirements and their owners, who raised the clash, which requirement yielded and by how much, who approved that, and whether anyone later measured the cost.
That definition rules out two neighbors. A preference dispute, where people want different things but nobody can state a measurable target, is a prioritization problem. A requirement that simply changed midway is a chronology problem, covered in the guide to which requirement version a coding agent should follow. The cases here are the hard engineering ones: security against startup time, validation against request latency, flexibility against the ability to simulate capacity.
AI teams want these records for coding and design agents that propose changes to production systems. An agent that treats a feature request as the only requirement can ship a correct feature that breaks a latency objective. Training and evaluation data has to show the real settlement, which in the Kubernetes record below is far more often a scoped or estimated compromise than a clean winner.
Public research data does not carry that settlement. Malik and colleagues (arXiv 2301.03709) treat conflict and duplicate detection as classification of requirement pairs, with Conflict, Duplicate and Neutral labels, and convert public sets such as UAV, WorldVista, PURE and OpenCoss into that form. A pair label says two sentences clash. It says nothing about who settled the clash or whether the settlement held, which is the part a buyer needs.
Why Kubernetes design proposals make a fair public test
Kubernetes makes every new feature answer a reliability requirement in writing before release, and it keeps the answer, the approver and the later outcome in one public repository. That makes its Kubernetes Enhancement Proposals, or KEPs, a strict test of how much of a requirement conflict a disciplined process actually records.
Each KEP has a kep.yaml file with a status and a stage, and a README built from a template. The template says the production readiness questionnaire has to be completed and approved before a KEP can move to implementable status and be included in a release, and that the KEP needs an approver from the production readiness approvers team. Approvals sit in a separate file per KEP, one entry per stage.
The competing requirement has an owner and numbers. SIG Scalability's SLO document lists official objectives, including startup latency of schedulable stateless pods at a 99th percentile per cluster-day of 5 seconds or less in a default installation, and mutating API call latency at 1 second or less, excluding virtual and aggregated resources and custom resource definitions. The questionnaire asks each feature author directly: will enabling or using this feature increase the time taken by any operation covered by existing SLIs and SLOs?
So a KEP that answers yes is a declared conflict between a feature requirement and a scalability requirement, with an approver on file and a status that records what happened later. The analysis below reads every answer to that question in the repository at commit ea3e81a, dated October 24, 2026.
What 386 answers to the latency question reveal
About one in four KEPs that answer the question admit that the feature can slow an operation the SLOs cover, and very few measure the cost: 104 of 386, or 26.9 percent, admit a cost, 5 report a measured result and 19 promise one. The other 80 rest on reasoning alone.
Of the 104, 59 state the cost plainly and 45 call it negligible, slight or minimal. Another 256 answers deny any effect and 26 take no position, either left blank, left as template text or answering a different question. Thirty-seven of the 104 confine the cost to clusters, workloads or requests that opt into the feature, the most common explicit settlement in the answers. Only 12 put a number with a unit on the cost, and some of those numbers are design targets rather than measurements.
The approval trail is nearly complete. Of the 104, 103 have a production readiness approval file, 53 with an approval for the stable stage. By status, 36 are implemented, 64 implementable, 2 withdrawn, 1 superseded and 1 provisional. Another 300 of the 686 KEP directories predate or skip the question and are not in these counts. Each step, with the rule behind it:
| Step | Count | Rule applied |
|---|---|---|
| KEP directories at commit ea3e81a | 686 | kep.yaml and README.md both present; template and approval folders excluded |
| Answer the SLO latency question | 386 | First README line containing the question text; HTML comments removed |
| Deny any effect | 256 | Answer opens with No, Nope, None or N/A, or a reader labeled it a denial |
| Admit a cost, plain or small | 104 (59 plain, 45 small) | Reader label on every answer not settled by the opening word |
| Cost confined to opt-in use | 37 | The answer itself limits the cost to users of the feature |
| Measurement promised | 19 | The answer says benchmarking or measuring will happen later |
| Measured result reported | 5 | The answer cites a benchmark, test or experiment result |
Three conflicts the record keeps nearly whole
Three KEPs come close to a complete conflict record, each with the requirement that yielded, the stated reason and a later outcome in the same files. They are worth reading before writing a data request, because each still lacks something different.
Security over startup time. KEP-2535 makes the kubelet confirm that a pod is entitled to an image that another pod pulled with credentials. When it is enabled, pods without those credentials must authenticate by pulling the image manifests from the registry again. The SLO answer says the round trip will slow pod creation and states the trade in one line: "This slowdown is the expense of the added security of this feature." Security won. The record never says how much slower, and its kep.yaml lists beta in v1.35 with status implementable.
Correctness for those who opt in. KEP-2885 adds server-side validation of unknown fields. Its answer reports that benchmarks of the alpha changes showed about 2 to 5 percent slower request latency and about 4 to 8 percent more memory for JSON and YAML requests that opt into validation, and argues the overall effect is negligible because most high-frequency system traffic uses protobuf. This is the full trace: a number, a scope, a reason and a measurement, followed by stable in v1.27 according to its kep.yaml.
Operability over flexibility. KEP-3063, the first design for dynamic resource allocation, admitted pod startup and API latency costs and was later withdrawn. Its README says the KEP was withdrawn in Kubernetes 1.32 with its code removed, and lists the main objections: a cluster autoscaler cannot reason about resource availability under the design, and scheduler and drivers negotiate through a complex back-and-forth via the API server. The structured parameters design, KEP-4381, continued as the base, and the README states the price: drivers are limited to what Kubernetes' structured parameter models support. The objections are on record; the people and roles who raised them are not.
Promises to measure that never came back to the record
Four KEPs that reached the stable stage, with status implemented, still say in their SLO answer that the latency cost will be measured later. The promise was written, the feature shipped, and the SLO answer was not updated with a result.
KEP-2876, validation rules for custom resources, says it expects the effect to be negligible "but will measure it before Beta"; git blame dates that line to September 9, 2021, and the kep.yaml lists beta in v1.25 and stable in v1.29. KEP-3488, CEL admission control, and KEP-3962, mutating admission policies, both say the effect is expected to be negligible and will be measured before GA; the lines date to April 10, 2023 and January 10, 2024, and the features list stable in 1.30 and v1.36. KEP-5073, declarative validation, says benchmarks will be taken to measure impact, in a line dated February 13, 2025, with stable in v1.36.
This does not show that nobody measured. KEP-2876's beta criteria link an issue to benchmark the conversion code, and the work may sit in pull requests, CI dashboards or performance tests. It shows that the verification lives outside the decision record. In a dataset, a promise without a result or a pointer to one has to be labeled promised and not recorded, and it cannot support a claim that the compromise held.
The engineering decision trace: fields that make a conflict usable
A conflict record is usable when a second reader can see both requirements with their targets, who raised the clash, how it was settled and for whom, who approved it, and whether the cost was measured afterward. The trace below lists those fields, where Kubernetes keeps each one, and how often the 104 cost-admitting KEPs carry it.
Two fields decide whether a record can be labeled at all. The competing requirement needs a number, because a conflict with an unstated target cannot be judged. The verification field needs a result or a pointer, because the rest of the trace describes intentions. The trace, field by field:
| Trace field | What it must hold | Where KEPs keep it | In the 104 cost-admitting KEPs |
|---|---|---|---|
| Requirement A and owner | The feature or change requested, and the team accountable | Owning SIG in kep.yaml; README summary | 104 of 104 |
| Requirement B and target | The constraint at risk, with its number | SIG Scalability SLO document, linked from the template | Target by link only; 12 answers size the cost with a unit |
| Who raised the clash | Role of whoever raised it, and in which record | Author self-declares in the questionnaire; objections stay in review threads | 104 self-declared; objections not counted, though KEP-3063 lists some |
| Resolution and scope | Which requirement yielded, by how much, for whom | Questionnaire answer and design sections | Opt-in scope stated in 37 |
| Authority | Who approved the trade, at which stage | Production readiness approval file | 103 of 104; 53 approved for stable |
| Verification | Measured cost after the change, against the target | Answer text, test plan, linked issues | 5 measured; 19 promised |
| Later outcome | Shipped, revised, withdrawn or requirement redefined, with dates | kep.yaml status and stage; implementation history | Status in 104; 2 withdrawn, 1 superseded |
An outcome rubric for conflict records
Grade each conflict by what the evidence shows about its settlement, not by whether the feature shipped. The six labels below cover what an engineering archive will contain; the first two support positive training examples, the middle two mark incomplete records, and the last two record a change of course. Where the KEP labels in this analysis map onto a rubric label, the count is given:
- Measured compromise: the cost was measured and reported against the target after the change. KEP analogue: 5 answers report a measured result.
- Scoped compromise: the yielding requirement keeps its target for everyone who does not opt in. KEP analogue: 37 answers confine the cost to opt-in use.
- Accepted on estimate: the cost was reasoned about but never measured in the record. KEP analogue: 80 answers.
- Promised, not recorded: a measurement was promised and no result or pointer follows. KEP analogue: 19 answers, 4 of them in features already stable.
- Requirement redefined: the constraint itself moved. Examples, not a count: KEP-3257 says the definition of stateless pods in the startup SLO would need updating, and KEP-4671 says the pod startup SLO should be adjusted for gang scheduling.
- Withdrawn after objections: the proposal stopped and the record says why. Example: KEP-3063, withdrawn in Kubernetes 1.32.
The strongest objection: merged records only show conflicts the feature survived
The objection is right about the public record: 100 of the 104 cost-admitting KEPs are implementable or implemented, so the written history reads as if the feature nearly always wins. A proposal stopped in review over latency may never merge a KEP at all, so merged design records overrepresent survivors.
Two more limits point the same way. Authors grade their own costs, and 45 of the 104 call theirs small; a reviewer who disagreed would usually say so in a thread the repository does not hold. And implemented status shows that a feature shipped, not that the conflict was settled for users. A passing test suite and a closed tracking issue say nothing about whether pod startup still met its objective in real clusters.
The practical conclusion is to treat merged design documents as one third of a conflict dataset. The other two thirds are the proposals and review objections that lost, and the post-rollout measurements that show whether the accepted cost matched the estimate. A model trained only on the first third learns that features win and that estimates are enough.
How buyers would use conflict records, and what private histories add
Buyers use conflict records in two ways: as supervised examples of how a trade was settled, and as held-out evaluation items where a model must propose the settlement. In training, the input is the two requirements with their owners and targets plus the options considered, and the target output is the yielding requirement, the scope of the compromise and a verification plan.
In evaluation, hide the decision and grade a model's proposal on three checks: it names the owner whose requirement yields, it limits the cost to the narrowest population that can bear it, and it specifies a measurement against the stated target. Records labeled measured or scoped compromise serve as references; records labeled accepted on estimate should be scored only on the first two checks. Latency trade-offs in agent evaluation raise the same measurement problem from the model's side.
Company histories hold what public projects drop: SLO dashboards and error budgets before and after a rollout, incident tickets tied to the feature flag, the review threads that carried the objection, and rejected proposals. They also carry more risk. Security-versus-latency conflicts can describe controls in detail, latency investigations name customers, and review threads name employees, so security review, role tokens and de-identification come first, and design notes about live vulnerabilities stay out.
SourceX does not hold engineering records in stock; it sources each dataset from businesses against a specific request, with scope, volume, language, format, timing and licensing needs set on its request form. A request for conflict records should add the constraint types that matter, the minimum trace fields, the post-rollout window and an acceptance test, for example the share of records with a verification result or pointer. Whether a given company's history fits is decided case by case.
Methods note: repository, counting rules and limits
Counts come from a script that reads files in a clone of kubernetes/enhancements at commit ea3e81a0d41d (October 24, 2026); no repository code was run. The population is every directory under keps/ that holds both kep.yaml and README.md, excluding the template and the production readiness folder: 686. The question is the first README line containing the text increasing time taken by any operations covered by; the answer is everything after it up to the next markdown heading or the next line containing enabling / using this feature, with HTML comments removed and an unclosed comment treated as running to the end of the answer.
Answers whose first word, after leading markdown symbols, is No, Nope, None or N/A count as denials. At least eleven of them add a qualification, eight conceding a negligible or minimal cost; all stay denials under that rule, and the script lists the eleven that contain a contrast word such as but or a small-cost word such as negligible. One reader labeled each of the other 126 non-blank answers with a position (plain cost, small cost, denial or no position), and each cost answer with evidence (measured, promised or estimated, in that precedence) and scope (opt-in only when the answer itself limits the cost to users of the feature). Small means the answer applies a word such as negligible, minimal, slight, small or fractional to the increase; an answer that asserts no SLO-covered operation is affected counts as a denial. KEP-2339 is a judgment call: it counts as a plain cost because it states its API-call cost without a qualifier and calls only a second effect, on API server startup, negligible. An answer counts as sizing the cost when it contains a number followed, in any case, by %, percent, x, ms, s, sec, us, µs, ns, KB, KiB, MB, MiB, GB, GiB, B or QPS, or by second, millisecond, microsecond, nanosecond, minute or byte, singular or plural.
Status is the first token after status: in kep.yaml, with quotes and trailing comments removed and the value lowercased, and one misspelling of implemented corrected; stage is read the same way. Approval stages are the alpha, beta and stable keys in the production readiness file named for the KEP number under its SIG folder; approver names were not read or saved. Shares are computed from integer counts and rounded half up to one decimal once. The saved files hold KEP paths, numbers and labels only. Not measured: Alternatives and Drawbacks sections, review threads, real cluster performance, and KEPs without the question. The SLO figures come from the kubernetes/community repository at commit aeee117, and the arXiv description from a search excerpt on arxiv.org.
Frequently asked questions
What is an engineering requirement conflict dataset?
It is a set of records in which two owned, testable requirements could not both be met, each linked to who raised the clash, which requirement gave way and by how much, who approved the trade and what was measured afterward. Its value is the settlement and the verification, not the disagreement itself.
How is this different from a requirement conflict detection dataset?
Detection datasets label pairs of requirement sentences as conflicting, duplicate or neutral. A decision dataset starts where detection stops: it records how the conflict was resolved, under whose authority, and whether the accepted cost held up once the change shipped.
Why use Kubernetes KEPs as the public example?
Kubernetes asks every feature whether it will slow operations covered by its scalability objectives, records a production readiness approver per stage and tracks each proposal's status. That combination makes it possible to count how often a declared trade-off was scoped, measured or left as an estimate.
Does a promise to measure count as verification?
No. Four KEPs that reached stable still say the latency cost will be measured later. The measurement may exist elsewhere, but a record without a result or a pointer to one should be labeled promised, not recorded, and kept out of positive training examples.
What should a buyer ask a supplier for?
Ask for both requirements with owners and numeric targets, the review record that raised the conflict, the resolution and its scope, the approver, the post-rollout measurement and the later outcome. Ask also for rejected proposals, because merged design documents overrepresent conflicts the feature survived.
Sources
- Kubernetes enhancements repository at commit ea3e81a (October 24, 2026), from which SourceX counted 686 KEP directories, 386 answers to the SLO latency question, 104 cost-admitting answers, 5 measured and 19 promised. Source
- The KEP template requires the production readiness questionnaire to be completed and approved before implementable status, requires a production readiness approver, and asks whether a feature increases time taken by operations covered by existing SLIs and SLOs. Source
- Kubernetes SLO document: official startup latency of schedulable stateless pods at p99 per cluster-day of 5 seconds or less, and mutating API call latency of 1 second or less, in a default installation. Source
- KEP-2535 states that re-authenticating image pulls slows pod creation and that the slowdown is the expense of the added security. Source
- KEP-2885 reports benchmarks of about 2-5% slower request latency and 4-8% more memory for JSON and YAML requests that opt into validation. Source
- KEP-3063 was withdrawn in Kubernetes 1.32, with objections over cluster autoscaling support and complex API server negotiation; KEP-4381 continued. Source
- KEP-2876's SLO answer still says the latency effect will be measured before Beta, while its kep.yaml lists stable in v1.29 and status implemented. Source
- KEP-3257 says its projected volume type will affect the pod startup SLO and that the definition of stateless pods would need updating. Source
- Malik and colleagues frame requirement conflict and duplicate detection as requirement-pair classification with Conflict, Duplicate and Neutral labels, converting UAV, WorldVista, PURE and OpenCoss. Source
Tell us what data you need
Share scope, volume, format, timing and licensing needs. Datasets are sourced on request.